Pro - PMI Rope

PMI® EDC Anchor Sling

PMI Technical Team — Fri, 06 Mar 2026 18:17:31 +0000

The PMI® EDC Anchor Sling is an ANSI-rated 22 kN (5,000 lbf) anchor sling built for everyday carry and versatile anchor rigging. Its 8mm construction uses a Technora® sheath with a single Kevlar® tracer and a Dyneema® and polypropylene core, delivering exceptional strength-to-weight performance across all three lengths.

Available in 4′, 6′, and 8′ lengths for girth hitch, basket, and choker configurations. Tested to 22kN straight pull, 12,300 lbs basket, and 5,300 lbs choker.

PMI® Extreme Mantle Rope Guard – 24″

PMI Technical Team — Fri, 06 Mar 2026 18:03:18 +0000

The PMI® Extreme Mantle Rope Guard is built for the harshest edge protection demands. Its multi-layer construction combines ballistic nylon, Kevlar®, low-density polyethylene (LDPE), and cotton canvas to protect your rope against sharp edges, abrasion, and extreme friction.

At 24″ long and 8.40 oz. (238 g), the Extreme Mantle provides robust protection where standard rope guards fall short – industrial applications, confined space rescue, and rope access at difficult anchor points.

PMI® EDC Anchor Hitch – 33″

PMI Technical Team — Fri, 06 Mar 2026 18:03:09 +0000

The PMI® EDC Anchor Hitch is a compact, ANSI-rated 22 kN (5,000 lbf) anchor sling built for everyday carry. Its 8mm construction uses a Technora® sheath with a single Kevlar® tracer and a Dyneema® and polypropylene core, delivering exceptional strength-to-weight performance in a lightweight package.

The 33″ length is ideal for girth hitch, basket, or choker configurations at anchor points. Tested to 22kN straight pull, 12,300 lbs basket, and 5,300 lbs choker.

12.5 mm (1/2″) PMI® Hoistmaster

PMI Technical Team — Fri, 20 Feb 2026 18:19:50 +0000

A new standard in tower rigging.

Whether you’re hauling heavy loads or working a site, this 1/2″ line is engineered for the harshest conditions you’ll face.

High strength, low stretch Unicore® technology outperforms traditional double-braids in durability, reliability, and minimal rotation in abrasive lifting environments. By bonding the core and sheath, we’ve eliminated the risks that come with traditional ropes.

WARNING

This product is a utility rope and is not rated or intended for life-safety, human support, fall protection, rappelling, climbing, rescue, or any application where failure could result in injury or death.

SKEDCO Rapid Extraction Sked

Marketing — Tue, 26 Aug 2025 21:03:52 +0000

The Rapid Extraction Sked Stretchers are designed for increased safety and speed ofpackaging and extraction of patients from the battlefield and other environments. They are lighter weight and have a harness included for greater safety and to keep the patient properly positioned in the litter. The Horizontal lift slings are the same as the previous models except that they are both the same length. In the manner they are used they break at 18,000 pounds and there are two of them. The vertical lift sling is incorporated into the attached harness thus eliminating the rope used in previous models of the Sked. This saves a lot of time as they are always connected and ready for use. Rather than weaving a rope through the grommets and remembering how to tie the knots, all you do is release the screw link at the head end and clip it into the helicopter winch hook or the rope rescue haul system. The harness is very unique too. The vertical webbing is woven through the Sked cross strap eyes and are connected at the top with a triangular screw link that is rated at 5,000 pounds minimum break strength. The straps are connected at the lower end by a Cobra buckle that is used in many brands of rescue harnesses.

At the lower end of the harness are adjustable leg loops that are secured around the patient’s upper leg in order to lift his weight. They are sewn to the vertical harness webbing at the side of the Sked. In case of an amputation you just use one leg loop around the existing leg. If both legs are amputated the leg straps are buckled to each other to form a loop around the patient’s lower torso which will keep him positioned in the upper part of the Sked which makes it far easier to handle the Sked. This configuration of the leg straps also makes it possible to form an improvised junctional tourniquet which will aid in controlling bleeding.

At the top end of the harness there is an attached chest harness to keep the patient from sliding out in case the Sked somehow gets inverted. It is crossed across the patient’s arms and shoulders and will form an X over the chest for maximum safety.

BEAL Rope Cleaner

ajohnson — Thu, 21 Aug 2025 15:29:20 +0000

The Beal Rope Cleaner is an ecodetergent certified by ECOCERT Greenlife according to the ECOCERT standard. Its gentle, dye-free formula is made in a cauldron, the old-fashioned way, using the Marseille method to take care of your equipment. Detergent certified by ECOCERT Greenlife according to the ECOCERT “Ecodetergent” standard available on http://detergents.ecocert.com

PMI Dynamic Sewn Lanyard Extreme

ajohnson — Mon, 04 Aug 2025 17:51:40 +0000

A lighter weight version of the popular 11mm PMI® Dynamic Sewn Lanyard retaining the 22kN strength. Intended for personal use, such as fall arrest, fall prevention, and work positioning. Ideal for fall prevention when ascending or descending in rope access work and vertical caving. This lanyard has PMI® sewn eyes on each end, creating a permanent, sewn termination that is stronger than any knot. Requires carabiners for proper use.

PMI Versa Lanyards

PMI Technical Team — Fri, 27 Jun 2025 13:57:53 +0000

The PMI Dynamic Versa Lanyard line features a unique feature that the connector ends are unsewn, allowing the user to choose their preferred life safety knot at the end(s). Each leg is close to 60 inches long, with enough length for even the tallest user and a large knot/loop.

The VersaTether is a single leg, the VersaTwo Lanyard has two legs with the sewn eye being twisted to allow for a better location of the lanyard position on the harness. The VersaLink

Lanyard also has two legs and a short loop for making a close connection.

Testing shows that tied knots can help provide increased safety by helping to reduce impact forces in the event of a fall.

9 mm PMI® Rapid Search Line II

ajohnson — Thu, 20 Feb 2025 17:19:03 +0000

Designed by firefighters for firefighters, this supple search line packs away small but is highly grippable even with a gloved hand. Highly visible this search line provides maximum visibility in the fire ground environment. Not intended for rappelling.

Note: Both nylon and aramid fibers will burn if exposed to flame, but nylon will melt at much lower temperatures.

PMI® Hasty X Evacuation Seat

ajohnson — Fri, 03 Jan 2025 18:23:39 +0000

The PMI® Hasty X Evacuation Seat is intended for use as an evacuation and extrication device. It is a full two pounds lighter than the previous version of the PMI® Hasty Harness. This evacuation seat is designed for use as a quick, efficient, and easy-to-use device for evacuation when other harnesses are not available and a rapid evacuation time is essential. It is also used as an extrication seat for attaching to a subject when a separate extrication system is needed that can easily go over bulky clothing or equipment. The strategic cutout of material for the lower area has dual straps versus a single strap between the legs that provides a comfortable and secure fit for most body sizes. Make sure to have the PMI® Hasty X Evacuation Seat for any hasty evacuation or extrication rescue situation!