Pro Personal Gear - PMI Rope

PMI® EDC Anchor Sling

PMI Technical Team — Fri, 06 Mar 2026 18:17:31 +0000

The PMI® EDC Anchor Sling is an ANSI-rated 22 kN (5,000 lbf) anchor sling built for everyday carry and versatile anchor rigging. Its 8mm construction uses a Technora® sheath with a single Kevlar® tracer and a Dyneema® and polypropylene core, delivering exceptional strength-to-weight performance across all three lengths.

Available in 4′, 6′, and 8′ lengths for girth hitch, basket, and choker configurations. Tested to 22kN straight pull, 12,300 lbs basket, and 5,300 lbs choker.

PMI® EDC Anchor Hitch – 33″

PMI Technical Team — Fri, 06 Mar 2026 18:03:09 +0000

The PMI® EDC Anchor Hitch is a compact, ANSI-rated 22 kN (5,000 lbf) anchor sling built for everyday carry. Its 8mm construction uses a Technora® sheath with a single Kevlar® tracer and a Dyneema® and polypropylene core, delivering exceptional strength-to-weight performance in a lightweight package.

The 33″ length is ideal for girth hitch, basket, or choker configurations at anchor points. Tested to 22kN straight pull, 12,300 lbs basket, and 5,300 lbs choker.

PMI Dynamic Sewn Lanyard Extreme

ajohnson — Mon, 04 Aug 2025 17:51:40 +0000

A lighter weight version of the popular 11mm PMI® Dynamic Sewn Lanyard retaining the 22kN strength. Intended for personal use, such as fall arrest, fall prevention, and work positioning. Ideal for fall prevention when ascending or descending in rope access work and vertical caving. This lanyard has PMI® sewn eyes on each end, creating a permanent, sewn termination that is stronger than any knot. Requires carabiners for proper use.

PMI Versa Lanyards

PMI Technical Team — Fri, 27 Jun 2025 13:57:53 +0000

The PMI Dynamic Versa Lanyard line features a unique feature that the connector ends are unsewn, allowing the user to choose their preferred life safety knot at the end(s). Each leg is close to 60 inches long, with enough length for even the tallest user and a large knot/loop.

The VersaTether is a single leg, the VersaTwo Lanyard has two legs with the sewn eye being twisted to allow for a better location of the lanyard position on the harness. The VersaLink

Lanyard also has two legs and a short loop for making a close connection.

Testing shows that tied knots can help provide increased safety by helping to reduce impact forces in the event of a fall.

PMI® Hasty X Evacuation Seat

ajohnson — Fri, 03 Jan 2025 18:23:39 +0000

The PMI® Hasty X Evacuation Seat is intended for use as an evacuation and extrication device. It is a full two pounds lighter than the previous version of the PMI® Hasty Harness. This evacuation seat is designed for use as a quick, efficient, and easy-to-use device for evacuation when other harnesses are not available and a rapid evacuation time is essential. It is also used as an extrication seat for attaching to a subject when a separate extrication system is needed that can easily go over bulky clothing or equipment. The strategic cutout of material for the lower area has dual straps versus a single strap between the legs that provides a comfortable and secure fit for most body sizes. Make sure to have the PMI® Hasty X Evacuation Seat for any hasty evacuation or extrication rescue situation!

Pacific R6V MkII Seeker Lightweight Water Rescue Helmet

ajohnson — Sat, 13 Jul 2024 01:10:27 +0000

Tailored for USAR teams, paramedics, rescue teams, and enthusiasts, Pacific’s R6 Series of lightweight helmets proves versatile across various scenarios and can be used for a multitude of situations. With distinct features in each model, the R6 series adapts seamlessly to a broad spectrum of situations.

The R6V MkII Seeker departs from the traditional configuration of rescue and wildfire helmets. The Seeker has a fiberglass-reinforced composite shell with a single-piece form-molded polyethylene (PE) liner that features water-release holes and full impact protection. The custom PMI Pacific Seeker continues the Pacific tradition of creating versatile helmets that serve as a platform for multiple accessories.

PMI® Stealth Tech Gloves – XXS

ajohnson — Thu, 16 May 2024 18:19:15 +0000

This XXS glove is an all-black version of the PMI® Rope Tech Glove. With a circumference of 6.5″-7.0″, it has superior protection without the compromise of dexterity.

Please note that all PMI Outlet items have limited stock.

PMI® Fingerless Belay Gloves White/Tan – XXS

ajohnson — Thu, 16 May 2024 16:43:24 +0000

PMI’s famous Rappel Glove, re-engineered. Fingerless design constructed of pliable goatskin and an extra layer of durable cowhide across the palm. Goatskin is used because it has a short break-in period and it also naturally contains lanolin which keeps the gloves supple. An original innovative designed leather pull tab between the fingers makes removal easy.

Please note that all PMI Outlet items have limited stock.

PMI® Heavyweight Rappel Gloves – XXL

ajohnson — Wed, 15 May 2024 20:35:34 +0000

Split cowhide offers more finger protection and wear resistance for rope work and rappelling. Two extra layers of cowhide protect the main wear area.

Please note that all PMI Outlet items have limited stock.

PMI® Heavyweight Rappel Gloves – Small

ajohnson — Wed, 15 May 2024 20:24:08 +0000

Split cowhide offers more finger protection and wear resistance for rope work and rappelling. Two extra layers of cowhide protect the main wear area.

Please note that all PMI Outlet items have limited stock.