Skedco - PMI Rope https://pmirope.com/product-category/brand/skedco/ PMI Rope | Rope, gear & equipment for your vertical world | pmirope.com Thu, 26 Feb 2026 16:44:41 +0000 en-US hourly 1 SKEDCO Rapid Extraction Sked https://pmirope.com/product/skedco-rapid-extraction-sked/ Tue, 26 Aug 2025 21:03:52 +0000 The Rapid Extraction Sked Stretchers are built for speed and safety in battlefield and rescue environments. Lightweight and equipped with an integrated harness, they keep patients properly positioned during lifts. The horizontal lift slings are matched in length and rated to 18,000 pounds, while the vertical lift sling is built into the harness, eliminating the need for ropes and knots—saving time and ensuring readiness.

The harness features vertical webbing woven through Sked cross straps, secured with a 5,000-pound triangular screw link and a Cobra buckle. Adjustable leg loops support the patient’s weight, adapt for amputations, and can be configured as an improvised junctional tourniquet. An attached chest harness crosses over the arms and chest, preventing sliding even if the Sked is inverted.

]]> The Rapid Extraction Sked Stretchers are designed for increased safety and speed ofpackaging and extraction of patients from the battlefield and other environments. They are lighter weight and have a harness included for greater safety and to keep the patient properly positioned in the litter. The Horizontal lift slings are the same as the previous models except that they are both the same length. In the manner they are used they break at 18,000 pounds and there are two of them. The vertical lift sling is incorporated into the attached harness thus eliminating the rope used in previous models of the Sked. This saves a lot of time as they are always connected and ready for use. Rather than weaving a rope through the grommets and remembering how to tie the knots, all you do is release the screw link at the head end and clip it into the helicopter winch hook or the rope rescue haul system. The harness is very unique too. The vertical webbing is woven through the Sked cross strap eyes and are connected at the top with a triangular screw link that is rated at 5,000 pounds minimum break strength. The straps are connected at the lower end by a Cobra buckle that is used in many brands of rescue harnesses.

At the lower end of the harness are adjustable leg loops that are secured around the patient’s upper leg in order to lift his weight. They are sewn to the vertical harness webbing at the side of the Sked. In case of an amputation you just use one leg loop around the existing leg. If both legs are amputated the leg straps are buckled to each other to form a loop around the patient’s lower torso which will keep him positioned in the upper part of the Sked which makes it far easier to handle the Sked. This configuration of the leg straps also makes it possible to form an improvised junctional tourniquet which will aid in controlling bleeding.

At the top end of the harness there is an attached chest harness to keep the patient from sliding out in case the Sked somehow gets inverted. It is crossed across the patient’s arms and shoulders and will form an X over the chest for maximum safety.

]]> SKED® Stretcher https://pmirope.com/product/sked-stretcher-only-orange/ Mon, 06 Sep 2021 04:24:55 +0000 ]]> The stretcher is fabricated from a special plastic formula which is both flexible and durable. Securing straps with steel buckles are sewn into the stretcher through brass grommets which contribute to the strength and durability.

]]> Skedco ‘Extra’ Webbing Handle Set, 4 handles https://pmirope.com/product/skedco-extra-webbing-handle-set-4-handles/ Mon, 06 Sep 2021 04:24:55 +0000 In addition to the four handles sewn permanently into the Sked® stretcher, four additional removable handles are provided to allow the Sked to be carried by up to 8 rescuers.

]]> Skedco Shuttle SKED® Kit, 4 HMH Skeds and 8 Rope Kits https://pmirope.com/product/skedco-shuttle-sked-kit-4-hmh-skeds-and-8-rope-kits/ Mon, 06 Sep 2021 04:22:24 +0000 Included are 4 HMH Skeds rolled and stored in rapid deployment bags. Also included are 8 Shuttle Sked rope kits in a single rapid deployment bag to keep everything organized. It would be wise to have up to 4 more HMD Skeds to move patients from the contaminated Shuttle Skeds to decon.   HMH Shuttle Sked ropes are constructed of 1/2 inch solid braid polypropylene. They are 200ft. long with a figure 8 knot saftied with a barrel knot and taped to prevent unraveling while in use. A Large aluminum D carabiner is attached. The rope kit includes a Haz-Mat rope bag for quick tangle free deployment. These ropes are attached to both ends of a HMD Sked for dragging into and out of the Hot-zone. ]]>

Included are 4 HMH Skeds rolled and stored in rapid deployment bags. Also included are 8 Shuttle Sked rope kits in a single rapid deployment bag to keep everything organized. It would be wise to have up to 4 more HMD Skeds to move patients from the contaminated Shuttle Skeds to decon.

 

HMH Shuttle Sked ropes are constructed of 1/2 inch solid braid polypropylene. They are 200ft. long with a figure 8 knot saftied with a barrel knot and taped to prevent unraveling while in use. A Large aluminum D carabiner is attached. The rope kit includes a Haz-Mat rope bag for quick tangle free deployment. These ropes are attached to both ends of a HMD Sked for dragging into and out of the Hot-zone.

]]> Skedco Skyhhook Rope Winch Only https://pmirope.com/product/skedco-skyhhook-rope-winch-only/ Mon, 06 Sep 2021 04:22:01 +0000 live load activity and require a backup safety fall protection system when using the SK-2531winch system. For material raising and lowering a 7″16″ rope can be used for weights under 500 lbs. For material operations the system is limited to a maximum of 500 kg or 1100 lbs. The weight is also limited by the type and adjustment of the Tripod and or equipment used as an anchor point. Static Kernmantle rope or similar approved ropes under NFPA 1983 rope Standards. The SK-2531 winch model has been tested above live load weights limits and that weight is 600 lbs. This weight coincides with NFPA1983, 1/2″ rope standards for Live Load Operations. We recommend preventing a shock load incident which could damage the equipment or lead to injury or death to the person on the rope system. Shock Load can be prevented by always practicing proper rope management throughout the live load operations. Shock load can occur when any weight is lifted off of the ground or is suspended. LOW SPEED
  • Gear Ratio: 2.2 to 1
  • Power Ratio: 13.5 to 1HIGH SPEED
  • Gear Ratio: 6 to 1
  • Power Ratio: 40 to 1
]]> The SkyHook Tripod Winch is a portable version of the high-performance kernmantle rope-based winches found on the USCG Jayhawks and other rescue helicopters. The two-speed winch has a detachable handle for compact storage. The base plate connects to either the SKED-EVAC® or Hercules tripod for confined space applications. Tie-down holes allow the winch to be used in a variety of field rigging applications. Dual anchor points for rope grabs not only provide anchors for belay systems, but can be used to pull a two rope system. Tailing grip can be adjusted to accept most diameters of rescue kernmantle ropes. SkyHook Tripod Winch Systems adhere to the legendary standard of creative machined excellence of Russ Anderson. Patent Pending.

The rope size we recommend is 1/2″ or 11/12mm for live load activity and require a backup safety fall protection system when using the SK-2531winch system. For material raising and lowering a 7″16″ rope can be used for weights under 500 lbs. For material operations the system is limited to a maximum of 500 kg or 1100 lbs. The weight is also limited by the type and adjustment of the Tripod and or equipment used as an anchor point. Static Kernmantle rope or similar approved ropes under NFPA 1983 rope Standards.

The SK-2531 winch model has been tested above live load weights limits and that weight is 600 lbs. This weight coincides with NFPA1983, 1/2″ rope standards for Live Load Operations. We recommend preventing a shock load incident which could damage the equipment or lead to injury or death to the person on the rope system. Shock Load can be prevented by always practicing proper rope management throughout the live load operations. Shock load can occur when any weight is lifted off of the ground or is suspended.

LOW SPEED

  • Gear Ratio: 2.2 to 1
  • Power Ratio: 13.5 to 1HIGH SPEED
  • Gear Ratio: 6 to 1
  • Power Ratio: 40 to 1
]]> Skedco Skyhook Rope Winch System https://pmirope.com/product/skedco-skyhook-rope-winch-system/ Mon, 06 Sep 2021 04:22:01 +0000
This capstan style winch is rated to haul people into helicopters. It fits onto a Sked-Evac® tripod. It can handle unlimited lengths of rope and is self tailing. It has recently been discovered for use in the WMD/Haz-Mat environment. When using continuous loops of rope it can haul as many as 6 victims at one time while delivering empty HMD Skeds back to the Hot-zone. The Skyhook Rope Winch System includes:
  • Skyhook winch
  • Custom carrying case
  • Trailer hitch mount
  • Powerhead bracket
  • Powerhead
  • Standard crank arm
  • Floating crank arm (Optional)
  • Cordura cover for winch capstan
]]> This system includes everything necessary for rapid evacuation of mass casualties in a biochemical environment. Because we never know how far away we can get from the Hot-zone, the kit includes continuous loop twisted polypropylene ropes, 1 each for distances of 100ft, 150ft, and 200ft. This kit allows as many as 4 rescuers in level A. There are also 4 clean Skeds for moving patients from the warm zone to decon to prevent dragging contaminated litters outside the area. Instructional video or cd-rom included.

 

This capstan style winch is rated to haul people into helicopters. It fits onto a Sked-Evac® tripod. It can handle unlimited lengths of rope and is self tailing. It has recently been discovered for use in the WMD/Haz-Mat environment. When using continuous loops of rope it can haul as many as 6 victims at one time while delivering empty HMD Skeds back to the Hot-zone.

The Skyhook Rope Winch System includes:

  • Skyhook winch
  • Custom carrying case
  • Trailer hitch mount
  • Powerhead bracket
  • Powerhead
  • Standard crank arm
  • Floating crank arm (Optional)
  • Cordura cover for winch capstan
]]> Skedco Complete Skyhook System https://pmirope.com/product/skedco-complete-skyhook-system/ Mon, 06 Sep 2021 04:22:01 +0000 This kit consists of:

        • 12 HMH Sked Stretchers & 3 rapid deployment bags
        • Skyhook Rope Winch System (SK-2530)
        • Bagged continuous loop rope 200ft. distance
        • Bagged continuous loop rope 150ft. distance
        • Bagged continuous loop rope 100ft. distance (Note: Amount of continuous loop rope is double the distance and the ends are spliced together at the factory.)
        • 2 knot passing pulleys
        • 2 2-inch polypropylene slings
        • 14 large aluminum D carabiners
        • 40ft. 1/2 inch nylon kernmantle rope
        • 2 8mm PMI prusik cord
        • 8 Haz-Mat rope grabs
        • 40ft. 1/2 inch polypropylene solid braid rope
        • 1 100 foot extension cord with reel
        • 1 large screw driver

This kit is designed for a large mass casualty incident. (More HMD Skeds may be needed) https://pmirope.com/product/skedco-hmh-sked-stretcher-body-only-no-straps/

]]> The Skedco Complete Skyhook System includes everything necessary for rapid evacuation of mass casualties in a biochemical environment. Because we never know how far away we can get from the Hot-zone, the kit includes continuous loop twisted polypropylene ropes, 1 each for distances of 100ft, 150ft, and 200ft. This kit allows as many as 4 rescuers in level A. There are also 4 clean Skeds for moving patients from the warm zone to decon to prevent dragging contaminated litters outside the area. Instructional video or cd-rom included.

 

This kit consists of:

        • 12 HMH Sked Stretchers & 3 rapid deployment bags
        • Skyhook Rope Winch System (SK-2530)
        • Bagged continuous loop rope 200ft. distance
        • Bagged continuous loop rope 150ft. distance
        • Bagged continuous loop rope 100ft. distance (Note: Amount of continuous loop rope is double the distance and the ends are spliced together at the factory.)
        • 2 knot passing pulleys
        • 2 2-inch polypropylene slings
        • 14 large aluminum D carabiners
        • 40ft. 1/2 inch nylon kernmantle rope
        • 2 8mm PMI prusik cord
        • 8 Haz-Mat rope grabs
        • 40ft. 1/2 inch polypropylene solid braid rope
        • 1 100 foot extension cord with reel
        • 1 large screw driver

This kit is designed for a large mass casualty incident. (More HMD Skeds may be needed) https://pmirope.com/product/skedco-hmh-sked-stretcher-body-only-no-straps/

]]> Skedco HMH SKED® Strap Kit https://pmirope.com/product/skedco-hmh-sked-strap-kit/ Mon, 06 Sep 2021 04:21:43 +0000 Key Features: No grommets to trap contaminants • Stores flat in stacks of up to 200 • Ideal for use in mass casualty incidents • Polypropylene straps are chemical resistant • 2” Side release buckles • Not for lifting patients]]> The HMH Sked® is designed for use in mass casualty incidents or Haz-Mat incidents. Patients can be rolled or dragged onto the HMH Sked® rather than lifted. This creates less rescuer fatigue and requires fewer rescuers to be exposed in the Hot Zone at a Haz-Mat incident. The HMH Sked® can be easily dragged by personnel wearing level A protection or even pulled by a rope connected outside the Hot Zone.

Key Features:
No grommets to trap contaminants • Stores flat in stacks of up to 200 • Ideal for use in mass casualty incidents • Polypropylene straps are chemical resistant • 2” Side release buckles • Not for lifting patients

]]>