ISC ALF™ Climb Assist Pulley- 2 Way Auto Locking

ISC ALF™ Climb Assist Pulley- 2 Way Auto Locking

$487.84

The ISC ALF™ Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on their way around a High Ropes/Challenge course. The ALF™ is also a protection solution for workers on towers, masts, Wind Turbines and even in construction applications where a cost-effective, temporary climb assist solution is required for short duration working. In the event of a fall, the ALF™ Pulley locks on quickly to arrest the fall.  As fall distances are extremely small, it is extremely unlikely that the user will be incapacitated.  However if necessary, a rescue can be easily organised from ground level. The ALF™ has been field trialed and cycle tested by over 4,000 users with no detriment to performance and with little or no wear.  The ISC ALF™ Climb Assist Pulley has been extensively drop tested, in line with both CE EN360 and ANSI Z359.  The unit has also been tested with weights other than those required for CE and ANSI Standards and has been statically pulled to destruction- making it probably the safest Climb Assist product in the world! The unit can be rigged in a continuous loop system, using a Large Single Prusik Pulley.
Service requirements: Immediately before, during and after use make visual inspections of the product to ensure that it is in a serviceable condition and is operating correctly. In addition to the basic visual inspections conducted by the user, the product must be examined annually, or more frequently depending on local legislation or intensity of use, by the manufacturer or a competent person authorised by the manufacturer. Other things, such as, extreme temperatures, humidity, the effects of chemicals, rust, cuts, abrasions or the frequency of use could affect the required service interval of the equipment.
 

SPECIFICATIONS:

        • Height: 210 mm (8 1/4″)
        • Width:  139 mm (5 1/2″)
        • Depth:  45 mm ( 1 3/4″)
        • Weight:  1205 g (43 oz)
        • Rope Size: Approved 11 mm EN 1891-A Ropes only
        • Body Material:  Aluminum
        • Finish Anodized
        • Made in Wales

DECLARATION OF CONFORMITY

https://www.iscwales.com/Uploads/Products/DoC/1-55-3020-1981-1-RP430-ALF-DofC.pdf

Description

The ISC ALF™ Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on their way around a High Ropes/Challenge course.

The ALF™ is also a protection solution for workers on towers, masts, Wind Turbines and even in construction applications where a cost-effective, temporary climb assist solution is required for short duration working.

In the event of a fall, the ALF™ Pulley locks on quickly to arrest the fall.  As fall distances are extremely small, it is extremely unlikely that the user will be incapacitated.  However if necessary, a rescue can be easily organised from ground level.

The ALF™ has been field trialed and cycle tested by over 4,000 users with no detriment to performance and with little or no wear.  The ISC ALF™ Climb Assist Pulley has been extensively drop tested, in line with both CE EN360 and ANSI Z359.  The unit has also been tested with weights other than those required for CE and ANSI Standards and has been statically pulled to destruction- making it probably the safest Climb Assist product in the world!

The unit can be rigged in a continuous loop system, using a Large Single Prusik Pulley.

Service requirements:
Immediately before, during and after use make visual inspections of the product to ensure that it is in a serviceable condition and is operating correctly. In addition to the basic visual inspections conducted by the user, the product must be examined annually, or more frequently depending on local legislation or intensity of use, by the manufacturer or a competent person authorised by the manufacturer. Other things, such as, extreme temperatures, humidity, the effects of chemicals, rust, cuts, abrasions or the frequency of use could affect the required service interval of the equipment.

 

SPECIFICATIONS:

        • Height: 210 mm (8 1/4″)
        • Width:  139 mm (5 1/2″)
        • Depth:  45 mm ( 1 3/4″)
        • Weight:  1205 g (43 oz)
        • Rope Size: Approved 11 mm EN 1891-A Ropes only
        • Body Material:  Aluminum
        • Finish Anodized
        • Made in Wales

DECLARATION OF CONFORMITY

https://www.iscwales.com/Uploads/Products/DoC/1-55-3020-1981-1-RP430-ALF-DofC.pdf

Additional information

Weight 2.64375 lbs

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up

You may also like…